ADI Models_CHIP ENERGY INTERNATIONAL CO., LIMITED

CAN Interface, CAN Transceiver, 1 Mbps, 3 V, 5.5 V, WSOIC, 16 Pin

LDO Regulator, Fixed, 4.3 V to 20 V Input, 0.5 V Output, 0.3 A, SOT-223-3

LDO Regulator, Adjustable, 3.8V to 15V Input, 0.6V/3A Output, TO-263-5

LDO regulator, adjustable, input 600mV to 5.5V, output 3.3A, BGA-98, 125°C

Transceiver, RS232, 4 drivers, 4 receivers, 4.5 V to 5.5 V, SSOP-24, -40 °C to 85 °C

Digital Isolator, 6 Amplifiers, 1.7 V, 5.5 V, SOIC, 16 Pin, 150 Mbps

CAN Interface, CAN FD Transceiver, 12 Mbps, 4.5 V, 5.5 V, WSOIC, 20 Pin

Digital Isolator, 4 Amplifiers, 1.7 V, 5.5 V, QSOP, 16 Lead, 150 Mbps

Specialty Interface, ATE Equipment, Sensitive Measurement Equipment, Hot Swappable Rack System, -15 V, 15 V, WSOIC, 18 Pin

CAN Interface, CAN Transceiver, I2C, 400 Kbps, 3 V, 5.5 V, MSOP-EP, 10 Pin

Gate Driver, 4 Amplifier, High Side, MOSFET, 20 Lead, WSOIC

DC-DC Switching Buck, Boost Regulator, Adjustable, 4 to 60V Input, 3.3 to 20V/0.5A Output, TSSOP-EP-16

DC/DC Controller, Flyback, 14V to 75V Supply, 1 Output, 88% Duty Cycle, 100kHz, TSSOP-EP-16

DC-DC Switching Buck Regulator, Adjustable, 3.6 to 25 V Input, 1.25V/0.6A Output, TSOT-23-6

Transceiver, RS422/RS485, 1 Driver, 1 Receiver, 4.5 V to 5.5 V, DFN-EP-8, -40 °C to 85 °C

Transceiver, Isolated, RS422 / RS485, 1 Driver, 1 Receiver, 1.71 V to 5.5 V, WSOIC-8

Transceiver, RS232, 2 drivers, 2 receivers, 3 V to 5.5 V, WSOIC-18, -40 °C to 85 °C

Transceiver, RS232, 2 drivers, 2 receivers, 4.5 to 5.5 V, -40 to 105°C, BGA-32

Isolated Differential Transceiver, RS485, 1 Driver, 1 Receiver, 3 to 5.5 V, MSOP-EP-10, -40 to 85 °C

Transceiver, RS422/RS485, 1 Driver, 1 Receiver, 4.75 V to 5.25 V, NDIP-8, -40 °C to 85 °C