ADI Models_CHIP ENERGY INTERNATIONAL CO., LIMITED

Voltage Reference, 10ppm/°C, 2.048V, 0.05%, Series, TSOT-23-6, 0°C to 70°C

DC-DC Switching Synchronous Buck Regulator, Adjustable, 3.4 to 42 V Input, 0.97V/2.5A Output, QFN-EP-24

DC-DC Switching Buck Regulator, Adjustable, 3 to 40 V Input, 0.8V/0.5A Output, DFN-EP-8

LDO Regulator, Adjustable, 1.8 V to 20 V Input, 0 V to 15 V Output, 0.5 A Output, MSOP-EP-12

Voltage Detector, 4 Supervisors, 4.675V Threshold, 1V to 6V, DFN-EP-12, -40°C to 125°C

Voltage detector, 6 monitors, 500 mV threshold, active low, open drain, 0.5 V to 6 V, DFN-EP-8

DC-DC Switching Buck Regulator, Adjustable, 4 to 40 V Input, 1.25V to 16V/250mA Output, DFN-8

Voltage Reference IC, 5ppm/°C, 2.5V, 0.08%, Series - Fixed, NSOIC-8, -40°C to 85°C

DC/DC Controller, Synchronous Step-Down, 4V to 38V Supply, 2 Outputs, 95% Duty Cycle, 780kHz, QFN-EP-28

Digital Isolator, 2 Amplifier, 2.7 V, 4 V, WSOIC, 8 Pin, 1 Mbps

Transceiver, RS422, RS485, 16 Mbps, 1 Driver, 1 Receiver, 3 to 5.5 V, -40 to 85°C, WSOIC-20

Transceiver, RS485, 1 Driver, 1 Receiver, 4.75 V to 5.25 V, NSOIC-8, 0 °C to 70 °C

Transceiver, RS422, RS485, 25 Mbps, 1 Driver, 1 Receiver, 3 to 5.5 V, -40 to 105°C, WSOIC-28

CAN Interface, CAN Transceiver, I2C, 400 Kbps, 3 V, 5.5 V, MSOP-EP, 10 Pin

Digital Isolator, 4 Amplifiers, 3.135 V, 5.5 V, WSOIC, 16 Pin, 10 Mbps

Transceiver, RS422/RS485, 1 Driver, 1 Receiver, 4.5 V to 5.5 V, MSOP-8, -40 °C to 125 °C

Linear Driver, ADSL/XDSL, TSSOP-EP

Transceiver, RS422/RS485, 1 Driver, 1 Receiver, 4.75 V to 5.25 V, NSOIC-14, -40 °C to 85 °C

Isolated Transceiver, RS422/RS485, 1 Driver, 1 Receiver, 1.7 V to 5.5 V, WSOIC-16, -40 to 125 °C

Differential Bus/Line Driver, RS422, RS485, 4 Drivers, 4.75 V to 5.25 V, 0°C to 70°C